![]() All I see is the black screen, or the no signal screen on all the different types of dislay (HDMI 1, HDMI 2, VGA, and Display Port). If there is no damage to that, then the display is. Search online for Samsung Galaxy Tab 2 10. The lights turn on, all the fan noise starts up, and I can hear all of the start up sounds, including skype start up sound, but no display. If that is pinched, ben, loose, twisted, damaged, disconnected, etc., then it would cause this problem. Although as a DIY repair all you can do is to temporarily replace the LCD screen to check if the problem was the screen or if it is in the systemboard if nothing is obviously damagedįaulty LCD screens cannot be repaired. In sort of situation, if your monitor still not display anything then the problem could be with the cable via might it be damaged. Check cable and reattach it running from your Monitor to PC. In case you have another monitor you can try connecting it. If the systemboard appears to be OK (no cracks, loose components etc) and the LCD flex cable systemboard connection appears to be secure then most probably the problem is in the LCD screen. One of the main reason when your Computer boot up but no display due to loose cable. If you still have a blank screen, your monitor may be malfunctioning. Here are the ifixit Samsung Galaxy Tab 2 10.1 Repair guides, which may be of some help in showing how to open the tablet so that it can be inspected. EYE-CARE LIGHTING: Our computer monitor lamp illuminates the desk space in front of your monitor, and it is no glare or reflected light on the screen. Hopefully it may just be a loose LCD flex cable connection on the systemboard. ![]() ![]() You would need some tools that are appropriate enough to use to open the tablet so that it can be checked for any obvious damage to the systemboard. ![]() Hi your description the touchscreen is working but not the LCD screen. ![]()
0 Comments
Leave a Reply. |